| Author |
Message |
|
|
 |
Wed Oct 23, 2019 4:07 am  |
I bought a nuface mini a couple of years ago used it initally but then we moved house and I stopped for a while went to use it again and found that although it would charge it wouldn't turn on. Opened it up and saw that one of the batteries was slightly corroded and so no longer working.
The batteries look like they could be replaces but would need to be soldered on. Has anyone done this or had a repair person do it? Its out of warrenty anyway so was thinking I may as well try? |
|
|
|
|
|
Wed Oct 23, 2019 7:32 am |
| Well I have ordered the batteries so will let you all know if it works! |
|
|
|
|
|
Fri Oct 25, 2019 5:56 am |
| Well in case anyone is interested I was able to swap out the battery and get the nuface mini working again! It was a bit tricky but only needed a few tools soldering kit some cable ties and new batteries so I'm happy and saved myself £150! |
|
|
|
|
|
Sun Oct 27, 2019 9:22 am |
Obviously that's not what they're expecting us to do. They just want us to buy replacements.
Right?
Where did you find the batteries? |
|
|
|
|
|
Sun Oct 27, 2019 9:52 am |
Yeah they just want you to buy a new device every few years. I think the old style Nuface had a battery compartment you could access to put new batteries in so the new design is obviously to make you buy a new one.
The batteries are 1.2V 600mAh 2/3AA NiMH Single Cell Battery with Tags on the same side. The mini takes two and the trinity takes 4 of the same kind I believe. I also used 750mAh as I couldn't find the 600mAh here in the UK but that is just the capacity and doesn't matter as long as the voltage and size is correct.
I got them from a battery merchent in the UK called component shop. |
|
|
|
|
|
Mon Oct 28, 2019 6:17 am |
| Thanks...I may check out replacing the battery in my old Trinity..(if I can find it!!) |
|
|
sanohdontree14@gmail.com
New Member
 
Joined: 22 Jul 2021
Posts: 1
|
|
|
Thu Jul 22, 2021 12:50 am |
Hi,
Can you tell me how you disassemble your Nuface mini. I can't seem to get the cover to open up. |
|
|
angievu1
New Member
Joined: 07 Dec 2021
Posts: 1
|
|
|
Tue Dec 07, 2021 8:35 am |
| There are clips at the bottom and sides on the Nuface mini that needed to be pressed in with a small flat screwdriver to open the back cover. Then turn the stainless balls counterclockwise to remove them. You will see two very tiny zip ties that hold the back cover to the unit. Just cut them with a razor blade to remove the back cover from the unit. |
|
|
|
|
| Sun Jan 12, 2025 12:40 pm |
If this is your first visit to the EDS Forums please take the time to register. Registration is required for you to post on the forums. Registration will also give you the ability to track messages of interest, send private messages to other users, participate in Gift Certificates draws and enjoy automatic discounts for shopping at our online store. Registration is free and takes just a few seconds to complete.
Click Here to join our community.
If you are already a registered member on the forums, please login to gain full access to the site. |
|
 |
|
