| Author |
Message |
rashig
New Member
 
Joined: 15 May 2005
Posts: 1
|
|
|
Sun May 15, 2005 12:40 pm  |
Hi,
I'm new here and got a few samples of the IS clinical, the active serum, the super serum, and the hydracool. My question is, do I let them dry before I put the next one on? The super serum and active serum seem to go on hard, not just glide on....then should I wait until before I put on the hydracool? Thanks |
|
|
|
|
|
Sun May 15, 2005 7:03 pm |
Yes, I would wait 10 mins before applying the Hydra Cool. Also, from your post is was a bit unclear, but you should only use 1 serum plus the Hydra Cool at one time.
EG: AM Super Serum plus Hydra Cool
PM Active Serum plus Hydra Cool |
_________________
~normal but prone to dryness~slightly sensitive~usually clear~totm breakouts~mid 20s~ |
|
|
|
|
Mon May 16, 2005 9:28 am |
I would strongly underline what faith said - you don't want to use the Active Serum and the Super Serum at the same time....
I do let the first layer dry before applying the HydraCool, but I find that both the Super and Active Serums are absorbed very very quickly.... No way that I wait 10 minutes!
In all honesty, there are plenty of times at night, when I'm super tired and in a bigggg hurry to dive into bed that I just slop the HydraCool on before the Active Serum is dry. Doesn't seem to hamper the effectiveness at all really  |
|
|
|
|
|
Tue May 17, 2005 2:59 pm |
| I'll second what katee said. Although I would recommend waiting, often I do not. Many times I put on my active serum, brush my teeth then put on my hydra cool and hop into bed. |
|
|
|
|
| Mon Feb 10, 2025 4:37 pm |
If this is your first visit to the EDS Forums please take the time to register. Registration is required for you to post on the forums. Registration will also give you the ability to track messages of interest, send private messages to other users, participate in Gift Certificates draws and enjoy automatic discounts for shopping at our online store. Registration is free and takes just a few seconds to complete.
Click Here to join our community.
If you are already a registered member on the forums, please login to gain full access to the site. |
|
 |
|
