| Author |
Message |
|
|
|
Sat Jan 30, 2016 6:48 pm  |
Hello,
I've been making my own C Serum, and I
think it's time I bought some PH Strips
to test the PH levels.
There are a ton on Ebay..the picture seem to
show values in whole number, 1,2 3, etc.
How can you know If the ph is 5.5 for instance.
Is there a way to measure half values.
I did see some strips with half numbers, but
they were pricey.
Thanks |
|
|
grofinet
New Member
 
Joined: 31 Dec 2015
Posts: 3
|
|
|
Mon Feb 01, 2016 8:08 am |
Get the lotioncrafter ph 2-9 test strips.
I've also personally had good results using cheap digital PH meters from ebay (the yellow kind)
The ph meters need to be calibrated using the included ph powders which you mix with distilled to create a known ph solution. Once calibrated you can double check the accuracy against the lotioncrafter strips. Be sure to calibrate regularly. |
|
|
|
|
|
|
|
|
Mon Feb 29, 2016 6:59 am |
Fawnie, that's a great idea. why didn't i think of it.
I got some cheapie chinese pH strips and some more expensive ones which has a higher accuracy.
problem is the colurs between pH is so similar.
Gets annoyingly difficult to figure out the exact number.
Was thinking of the digital pH monitor. How often do you have to calibrate? |
|
|
|
|
| Tue Nov 26, 2024 3:43 pm |
If this is your first visit to the EDS Forums please take the time to register. Registration is required for you to post on the forums. Registration will also give you the ability to track messages of interest, send private messages to other users, participate in Gift Certificates draws and enjoy automatic discounts for shopping at our online store. Registration is free and takes just a few seconds to complete.
Click Here to join our community.
If you are already a registered member on the forums, please login to gain full access to the site. |
|
 |
|
